Gift Tags with Tag Holders

Hi my friends, today I have these tags and matching tag holders up on the Scrapbook Adhesives by 3L Blog.

The tag holder was die-cut from decorative paper and Extreme Double-sided tape 1/8" was used to seal the seams.

A sun from the paper pack was cut out and Extreme Double-sided tape 1/8" was used to adhere it to a circle die cut from black cardstock.

For You was die-cut from gold glitter paper, layered onto black cardstock and popped up on the tag holder using 3D Foam Circles Black Mix.

A small butterfly was cut out from the paper pack and popped up on the right corner of the For You also using 3D Foam Circles.

This was then placed on a die-cut tag also using the Extreme Double-sided tape 1/8".

Black ribbon was added to the top of the tag and tied with gold cord.

This tag holder was made the same as above and to add a little bling.

Two strips of Extreme Double-sided Tape 1/8" and one of Extreme Double-sided Tape 1/4" were placed diagonally at the bottom right of the holder.  Gold Micro Glitter was sprinkled over the tape and rubbed in to insure adhesion.  Shake off any extra glitter and place it back into the bottle.

Materials Needed:

Scrapbook Adhesives by 3L® 3D Foam Squares Black Mix

Home Hobby by 3L® Extreme Double-sided Tape 1/8" Extreme Double-sided Tape 1/4"

Plus Sizzix Tim Holtz & Stephanie Bernard Collections- Dies Printworks Specialty Paper- Gold Glitter Paper, Black Cardstock Recollections- Decorative Paper

Have a crafty day!

Let's Connect!

Facebook

Instagram

Pinterest

Affiliate and Product Disclosure

I am on various Design Teams and get free goodies for blogging about craft products but only because I love
their products and genuinely use them. Ultimately my opinions are my own. A list of companies is in my sidebar.

 

Be Merry Wreath

Hi crafty friends, have you started thinking about your Christmas cards?  No, it's not too early to start, I have a Christmas card that is easy to mass-produce. Rubbernecker Stamps is having Christmas in July to help you begin your cards so they'll be ready in time to send out.  

My card is up on the Rubbernecker Blog with a tutorial you'll want to check out! Below is a list of Rubbernecker Stamps products used, just click on the image to go to their online shop.

Have a creative day! 

Let's Connect!

Facebook

Instagram

Pinterest

Affiliate and Product Disclosure

I am on various Design Teams and get free goodies for blogging about craft products but only because I love their products and genuinely use them. Ultimately my opinions are my own. A list of companies is in my sidebar.

Hello, Hello, Hello Mini Slimline Card

Happy July my crafty friends!  To start off the month, I have this mini slimline card up on the Scrapbook Adhesives by 3L Blog.

An Adhesive Sheet was placed on a white cardstock panel and Hello was die-cut three times.

Peel off the top paper liner from the words and apply gold Transfer Foil.

Do the same with both pink and blue Transfer Foil.

Use 3D Foam Micro Squares on the back of the gold foil Hello to pop it up. 

The other two were glued flat using the Dual Tip Glue Pen.

Use a mini slimline die to die-cut decorative paper, use the Dual Tip Glue Pen to adhere this to a slightly larger white panel and then onto a pink card.

A small butterfly was die-cut from gold glitter paper and glued to the top right of the card and a self-adhesive gem was added to the body.

Materials Needed:

Scrapbook Adhesives by 3L®

Metallic Transfer Foil Sheets Pastel Colors

3D Foam Micro Squares

Home Hobby by 3L® Dual Tip Glue Pen

Plus from Rubbernecker Stamps (click on the image to go to the Rubbernecker Stamps online shop).

Life is Better at the Beach

I have this card up on the Rubbernecker Stamps Blog, it's using the new Every Summer Set for a clean and simple design.

• Stamp images from the Every Summer Set onto watercolor paper with VersaFine Onyx Black Ink and emboss with clear embossing powder.
• Watercolor the images using Inktense Pencils, cut out and set aside.

• Glue strips of Printworks Specialty Paper diagonally on a white cardstock panel.
• Die-cut the panel using the Nested Rectangle Stitch Die Set.

• Die-cut the center of this panel using the Nested Oval Die Set.

• Pop the panel up on a larger white cardstock panel using foam squares then glue to an orange card.

• Ink the sentiment with Bubblegum and Apricot Color Fuse Inks on a strip of white cardstock and glue it to the top of the colored strips.
• Pop up the octopus also using foam squares and glue the starfish down below the oval.

Click on the items below to go to the Rubbernecker Stamps online shop.

Have a crafty day!

Let's Connect!

Facebook

Instagram

Pinterest

Affiliate and Product Disclosure

I am on various Design Teams and get free goodies for blogging about craft products but only because I love their products and genuinely use them. Ultimately my opinions are my own. A list of companies is in my sidebar.

4th of July Foil Flag Card

Since 4th of July is right around the corner, I have a surprisingly easy flag card made using adhesives and Metallic Transfer Foil from Scrapbook Adhesives by 3L and it's up on their Blog today.

Place strips of Premium Double-Sided Tape 1/2" on a white cardstock panel, to fill the panel but leave spaces between the tape.

Remove the paper liner on the tape and place red foil from the Metallic Transfer Foil Sheets Celebrate Colors on top of the tape with the pretty side up. Rub the foil with your finger, then remove the foil.

Trim off the white cardstock at the bottom of the pane, then layer this onto a slightly larger white cardstock panel using the E-Z Rubber Grand and set aside.

Place an Adhesive Sheet 4" x 6" on the same size piece of white cardstock and cut a piece to 2" x 2 1/2", save the rest to use later.

Remove the paper liner from the cut piece and place blue foil on the top with the pretty side up.  Rub the foil sheet and remove the foil carrier from the panel.

Using a craft knife, remove the stars from the E-Z Runner Stars and place them on the blue foil panel until it is filled.  Sprinkle this with Crystal Micro glitter, rub in the glitter and shake off excess.  Return the unused glitter to the jar and attach the panel to the left upper corner of the red foil striped panel using the E-Z Runner Grand.

Stamp the sentiment on vellum with VersaMark Ink and emboss with black embossing powder.  Die-cut using a tag die and tie the top with red and white twine.  Attach the tag diagonally to the right side of the flag using the E-Z Runner Permanent Fine Adhesive, it's pretty much invisible through the vellum.

Use the E-Z Runner Grand to attach the flag to a top folding dark blue card.

Skill Level: Intermediate

Materials Needed:

Scrapbook Adhesives by 3L® E-Z Runner Grand Refillable Dispenser E-Z Runner Stars Refillable E-Z Runner Permanent Fine Adhesive Metallic Transfer Foil Sheets Celebrate Colors Adhesive Sheets 4" x 6"

Home Hobby by 3L® Dual Tip Glue Pen Premium Double-Sided Tape 1/2"

Have a crafty day!

Let's Connect!

Facebook

Instagram

Pinterest

Affiliate and Product Disclosure

I am on various Design Teams and get free goodies for blogging about craft products but only because I love
their products and genuinely use them. Ultimately my opinions are my own. A list of companies is in my sidebar.

 

Lazy Hazy Days of Summer

Who's ready for the lazy hazy days of summer?  I say bring it on!!!  This card was made using the new release Every Summer Set to get you started on your summer journey.

Here's how my card was made-

• Stamp the images from the Every Summer Set on watercolor paper with Onyx Black VersaFine Ink, watercolor using Zig Clean Color Real Brush Pens, cut them out and set aside.  Or if you don't like to color or have decorative paper that you'd like to get rid of, just stamp and emboss on the decorative paper and cut them out.
• The images below were colored with Zigs.

• The images below were stamped on decorative paper and shadowed with decorative chalks using a flat brush.  Once the chalk is used, it doesn't rub off, no need to put anything on top of it.

• Stamp a white cardstock panel that's slightly smaller than a card and stamp the sentiment from the set on the upper right side with Dreamer Color Fuse Ink.
• Sprinkle some Golden Sand Embossing Powder below the sentiment and emboss it from underneath the paper so that the embossing powder doesn't blow off.

• Die-cut the top of a piece of cardstock, any color using the wave die from the Wave Die Cut and use it as a stencil to color blend the waves on a white cardstock panel using Color Fuse Inks #9 Set.

• Once done, die-cut the waves panel using the Nested Oval Stitch Die Cut Set and also die-cut white cardstock with the same set using a die one size larger.
• Glue the two ovals together and set them aside.

• Die-cut white cardstock using the Slimline OPC Fish Scales Die, glue it to the left side of the white cardstock panel and trim off the excess from the top and the bottom.  

• Now assemble the card by glueing the seashells and seaweed over the Golden Sand embossed area.
• Glue the Slimline OPC Fish Scales Die, to the left side of the white cardstock panel and trim off the excess from the top and the bottom of the panel.  
• Glue the panel to a light blue card.
• Glue the two ovals together and pop it up using foam squares and place it over the Fish Scales Die piece.
• Pop up the seahorse on top of the waves.
• Add two enamel dots at the top right of the card.

 Click on the product below to go to the Rubbernecker Stamps online shop.

Have a crafty day!

Let's Connect!

Facebook

Instagram

Pinterest

Affiliate and Product Disclosure

I am on various Design Teams and get free goodies for blogging about craft products but only because I love their products and genuinely use them. Ultimately my opinions are my own. A list of companies is in my sidebar.

My Dad Rocks

Happy June my crafty friends! I have this Father's Day card up on the

Scrapbook Adhesives by 3L Blog today. It's made using crafty adhesives

from Scrapbook Adhesives by 3L, decorative paper from ColorPlay the

Rad Dad Pack, Sizzix Memory Maker Stamp & Die Set aCircle Embossing Folder

and the Stampendous Deckle Die Set.

Have a crafty day!

Let's Connect!

Facebook

Instagram

Pinterest

Affiliate and Product Disclosure

I am on various Design Teams and get free goodies for blogging about craft products but only because I love
their products and genuinely use them. Ultimately my opinions are my own. A list of companies is in my sidebar.