Featured Post

Privacy Policy

I'm working on a new privacy policy for my followers, but for now you should know that if you comment on my site, my site collects your ...

Friday, December 23, 2022

Good Morning Coffee Card


Hi there! I hope all of my U.S.A. friends are staying warm during our super cold weather that's sweeping across the U.S. I thought this would be a good time to share a coffee card using stamps and dies from Rubbernecker Stamps.



The images were colored with Prisma Colored Pencils and cut using coordinating dies. 

Here are the products used from Rubbernecker Stamps, click on an image to go to the rubbernecker stamps online store.

 
Have a crafty day!

Let's Connect!

Affiliate and Product Disclosure
I am on various Design Teams and get free goodies for blogging about craft products but only because I love their products and genuinely use them. Ultimately my opinions are my own. A list of companies is in my sidebar.

Tuesday, December 20, 2022

Thanks Floral Tag Card



Die-cut floral and solid paper from the beautiful Modern Floral 6 x 6 Paper Pad using a die from the Nested Tag Stitch Die Set and  adhere them together with the solid color slightly off so it can be seen, using the E-Z Runner Grand Dispenser from Scrapbook Adhesives by 3L.


Here's what the beautiful Modern Floral Paper Pad looks like.



Stamp a gray panel with the Cracked Mud Background using a white pigment ink. Layer this onto a pink card.


Die-cut the Flower #8 and Flower #6 from white glitter paper and use a blending brush to apply green and pink inks.


Cut three strips of white glitter paper and glue them to the bottom of the gray panel.


Next use the Thanks Word w/ Shadow Die to cut the same solid color as used for the tag and for the shadow, cut gray and white cardstock.
Glue the two shadow pieces with the gray on top and the white underneath so it can be seen.  Then glue the thin Thanks to the top.


Now to assemble the card,
Glue the leaves and flowers to the card and pop up the tag over them using foam squares. 
Pop up the Thanks on the tag diagonally using foam squares.
Tie the top with ribbon and set aside.



Click on the product below to go to the Rubbernecker Stamps online store.
Have a crafty day!

Let's Connect!

Affiliate and Product Disclosure
I am on various Design Teams and get free goodies for blogging about craft products but only because I love their products and genuinely use them. Ultimately my opinions are my own. A list of companies is in my sidebar.

Thursday, December 15, 2022

Slimline Baby Card


Today I have this sweet slimline baby card up on the Scrapbook Adhesives by 3L Blog with a tutorial on how it was made and what adhesives were used to stick things down and pop them up. Be sure to check it out HERE.




Plus Rubbernecker Stamps- Sand Stencil Stampendous/Spellbinders Paper Arts- Frames and Boarders Die Set Ranger Ink- Distress Ink DCWV- Baby Boy Stack Paper Pad


Have a crafty day!

Let's Connect!

Affiliate and Product Disclosure
I am on various Design Teams and get free goodies for blogging about craft products but only because I love their products and genuinely use them. Ultimately my opinions are my own. A list of companies is in my sidebar.
 

Wednesday, December 7, 2022

Thanks Square Leaf Card

 

Use the Repeating Bricks Stencil to create a background on watercolor paper using pink and maroon glitter paste. Be sure to wash the stencil right away with warm soapy water. 



Once the paste is dry, die-cut the panel using the Nested Square Stitch Die Set.


Die-cut white cardstock using the Flower #5 Die Cut and apply Moss and Basil Color Fuse Inks using a blending brush.


Stamp the leaf with the French Script Background with Onyx Black VersaFine Ink.
Layer this on a black die-cut of the Flower #5 Die.


Now we will put this all together by layering the brick panel to a slightly larger black cardstock panel and this was popped up on a white cardstock panel that has been glued to a green square card.


Lasty stamp "Thankful" from the Kittie Say Phrases #1 on a strip of white cardstock with black ink pop this up diagonally on the bottom of the stem and add a black and white bow made from bakers' twine.


Have a crafty day!

Let's Connect!

Affiliate and Product Disclosure
I am on various Design Teams and get free goodies for blogging about craft products but only because I love their products and genuinely use them. Ultimately my opinions are my own. A list of companies is in my sidebar.

Thursday, December 1, 2022

Glitter Butterfly Thank You Card


I'm making Thank You cards to get ready for after Christmas. I have this up on the Scrapbook Adhesives by 3L Blog and all of the products used from Rubbernecker Stamps are listed below.

To create the background, a two-part stencil was used to first add the flowers with a red ink, then to add the leaves with green ink (link below).



Next, die-cut the center of the decorative panel using a rectangle die and die-cut gold glitter paper using one size larger of the rectangle die.



Layer all of the pieces using the E-Z Runner Grand and layer onto a gold glitter card.


Die-cut the butterfly from Spellbinders Paper Arts from white and gold glitter cardstock.


Once the butterfly body has been cut from glitter paper from PrintWorks Specialty Paper, use a brush to apply Nectar ink.


Use the Dual Tip Glue Pen to glue the butterfly pieces together.


Glue the butterfly diagonally to the center of the card and glue "Thank" at has been die-cut from black cardstock, below the butterfly using the Dual Tip Glue Pen. 




Click on the product below to go to the Rubbernecker Stamps online shop.
Have a crafty day!

Let's Connect!

Affiliate and Product Disclosure
I am on various Design Teams and get free goodies for blogging about craft products but only because I love their products and genuinely use them. Ultimately my opinions are my own. A list of companies is in my sidebar.

Sunday, November 27, 2022

Most Wonderful Time of the Year!



    I just love this truck from Rubbernecker stamps! I die-cut a bunch from different colors of cardstock and went with a two-tone red truck for my winter card. I die-cut the grass and sponged green Color Fuse Inks on the white cardstock. The trees are die-cut from decorative paper and gold glitter paper.

I have so many plans for this truck, for Valentine's Day I'll be loading it with hearts, shamrocks for St. Patrick's Day, eggs or bunnies for Easter, flags and or firworks for the 4th of July... the possibilities are endless!!

Here are the Rubbernecker products that I used to make my card. Click on the image to go to the Rubbernecker Stamps online shop.

Have a crafty day!

Let's Connect!

Affiliate and Product Disclosure
I am on various Design Teams and get free goodies for blogging about craft products but only because I love their products and genuinely use them. Ultimately my opinions are my own. A list of companies is in my sidebar.

Sunday, November 20, 2022

Watercolor Poinsettia Christmas Card

 


Stamp the poinsettia and leaves from the Buildable Poinsettia Set, with black ink on watercolor paper and color with watercolor pencils.
Die-cut the images using the coordinating Buildable Poinsettia Die Set and set aside



Die-cut white and red cardstock using the Nested Oval Stitch Die Set.
Stamp the right side of the white oval with the sentiment from the set using black ink and embossing with clear embossing powder.



Next, use the Quilted Stitch Cover and die-cut it on a white cardstock panel and glue it to a red card.


Glue the white oval to the top of the red oval and glue this to the right side of the card.
Pop up the poinsettia on the left side of the card using 3D Foam Squares. Glue the leaves underneath the poinsettia.
Randomly apply self-adhesive clear rhinestones on the card. 



Click on the product to go to the Rubbernecker online shop.
Have a crafty day!

Let's Connect!

Affiliate and Product Disclosure
I am on various Design Teams and get free goodies for blogging about craft products but only because I love their products and genuinely use them. Ultimately my opinions are my own. A list of companies is in my sidebar.

Friday, November 18, 2022

Christmas Cards Galore!!

For those of you that haven't started your Christmas cards, I have a bunch of cards with directions to help you get started. All of the cards and tags are made using Stamps and Dies from Rubbernecker Stamps. If you need to order anything, they have fast shipping so it's not too late to order!!

Santa and Reindear Tags


This Christmas Season don't forget to make some cute little tags for those gifts under the tree.  I used the Christmas Inchies Stamp Set from Rubbernecker Stamps that I used on Monday to make my slimline card (see it HERE), this set is not only cute but also versatile.  
Here's how my card was made-

  • Stamp Christmas Inchies on white cardstock with Onyx Black VersaMark Ink and color with Prisma Colored Pencils.  
  • Cut out and set aside.

  • Stamp tan cardstock with the Graduated Horizontal stamp using white pigment ink.
  • Stamp snowflakes from the Snowman with Presents stamp set over the stamped tan panel.
  • Die-cut the stamped tan panel twice using a tag from the Nested Tag Stich Die Set.

  • Cut a wave at the top of white glitter paper and use the same tag die to cut the glitter paper just tall enough for the bottom of the tag.
  • Glue the glitter paper to the bottom of the tags and layer and glue the tags, one on red and one on green cardstock that has been die-cut with the same tag die having them be a bit offset.  

  • Pop up the Christmas Inchies on the tag as shown. 
  • Glue the small Christmas stocking to the top of the reindeer tag and stamp the sentiment on the Santa tag with black ink.
  • Tie the tops of the tags with ribbon and cord.


  • Click on the product to go to the Rubbernecker Stamps online shop

    Christmas Tree Tags


    Gingerbread Man Tag




    Winter Coffee Card

    Just because Christmas is over, don't put away those snowflakes, they can be used all winter long!  I used them on the purple frame and die-cut them out of glitter paper.  Here's how my card was made;
    1. Die-cut a purple frame using the Deckle Frame Die.
    2. Stamp the frame with the Snow Flake Frame stamp and white pigment ink.  Pop this up on a white card using foam squares and set aside.
    3. Die-cut a white and purple cardstock with the Nested Rectangle Small Stitch Die Set and glue together so that they are offset. Glue this in the center of the frame on the white card.
    4. Stamp the girl from the Coffee Lovers Set with black ink on white cardstock, color with colored pencils, and die-cut with the Coffee Lovers Die set.
    5. Die-cut white cardstock using the Nested Tag Stitch die set and apply Sky Color Fuse Ink to the enter of the die.
    6. Use the Nested Oval Small Stitch Die Cut Set to cut grey patterned paper.
    7. Glue the oval to the bottom of the tag, pop up the girl with foam squares, and randomly ally sequines to the tag.
    8. Glue the tag to the center of the frame diagonally and glue on green ribbon that has been tied into a knot.
    9. Die-cut several snowflakes from white glitter paper and glue two flat to the bottom left corner and pop one up using a foam square.
    10. Stamp the sentiment from the set onto white cardstock with black ink and die-cut with the Nested Oval Small Stitch Die.
    11. Glue two snowflakes to the back of the sentiment and pop up the right corner.



    Slimline Christmas Card


    Hi there, I hope you're having a good start to your week.  How are you doing on those Christmas cards?  If you haven't started, today is the day!  For my card, I made a slimline card using the new Christmas Inchies stamp set.  Be sure to come back in a couple of days, I'll have tags that I made using the same set for a completely different look.

    Here's how my card was made;

    • Stamp the Santa, Christmas tree and Rudolph from the Christmas Inchies set on white cardstock with Onyx Black Ink and color with Prisma Colored Pencils.
    • Die-cut the images with the Christmas Inchies Die set and set aside.

    • Using the Slimline Solid Deckle Die, die-cut white cardstock.
    • Place the SLI Geometric X Die in the center of the Solid Deckle panel, keep it in place using a low tack tape and run it through the Crossover ll.
    • Repeatedly stamp the string of lights across the top of the die-cut panel with black ink.
    • Stamp Merry Christmas on the bottom center of the panel with black ink.

    • Color lights green, red, and yellow using Bottle Green Nuvo Crystal Drops, Carnation Red Liquid Pearls, and Sunflower Liquid Pearls. 
    • Apply Diamond Glaze over the top of the painted lights and let dry.

    • Layer the die-cut slimline panel onto slightly larger decorative paper and glue to a red slimline card.
    • Place foam squares on the back of the three Inchies and pop upon the card as shown.



    Hi there, I hope you're having a good start to your week.  How are you doing on those Christmas cards?  If you haven't started, today is the day!  For my card, I made a slimline card using the new Christmas Inchies stamp set.  Be sure to come back in a couple of days, I'll have tags that I made using the same set for a completely different look.
    Here's how my card was made;

    • Stamp the Santa, Christmas tree and Rudolph from the Christmas Inchies set on white cardstock with Onyx Black Ink and color with Prisma Colored Pencils.
    • Die-cut the images with the Christmas Inchies Die set and set aside.

    • Using the Slimline Solid Deckle Die, die-cut white cardstock.
    • Place the SLI Geometric X Die in the center of the Solid Deckle panel, keep it in place using a low tack tape and run it through the Crossover ll.
    • Repeatedly stamp the string of lights across the top of the die-cut panel with black ink.
    • Stamp Merry Christmas on the bottom center of the panel with black ink.

    • Color lights green, red, and yellow using Bottle Green Nuvo Crystal Drops, Carnation Red Liquid Pearls, and Sunflower Liquid Pearls. 
    • Apply Diamond Glaze over the top of the painted lights and let dry.

    • Layer the die-cut slimline panel onto slightly larger decorative paper and glue to a red slimline card.
    • Place foam squares on the back of the three Inchies and pop upon the card as shown.

    Products used
    Click on item to go to the Rubbernecker Stamps online shop

    Believe Santa Gnome Card


    Hey my crafty friends, have you started on your Christmas cards yet?  If not tic toc... now is the time, and if you're short on time here's a quick and easy festive card that you can whip out in no time.  The new William Winter Gnome from Rubbernecker Stamps is colored with Prisma Colored Pencils  and glitter was applied to the trim of the hat.

    He was cut out and popped up on a white panel.  The plaid paper edge was die cut using the Borders #2 die set, isn't that cute!!  Once the papers were glued to a red top folding card, the sentiment Magic of the Season was stamped in black and a twine bow was tied on the top.

    Wintery Gingerbread Man Slimline Card


    • Die-cut two pieces of kraft color cardstock, one-piece each of light blue cardstock, lavender cardstock,  black cardstock, and one piece of decorative paper using the Mr. Mrs. Gingerbread Die Cut.
    • Glue blue and black pieces onto one of the gingerbread men as shown and set aside.


    • Cut the hands and feet off of the decorative paper gingerbread man to make a cute little outfit for the Mrs.
    • Glue the pieces on as shown.
    • Apply two pink adhesive heart rhinestones for the buttons and set aside.


    • Die-cut white cardstock using the Nested Banner Stitch Die Set and Slimline OPC Diagonal die.
    •  Die-cut white cardstock with the Nested Oval Small Stitch Die Cut Set from light blue cardstock.
    • Glue the Slimline OPC Diagonal onto lavender paper, pop this up onto slightly larger decorative paper, and glue it onto a grey slimline card.
    • Die-cut white glitter paper with the Small Snow Flake Die 5100-03D and 5100-04D.  Glue these to the card.
    • Stamp sentiment from the Wintery Friends stamp set with black in on the die-cut banner, glue it on top of the blue oval die-cut and glue flat to the center of the card.
    • Randomly add dots of Nuvo Crystal Crushed Grape around the sentiment.
    • Pop up Mr. and Mrs. Gingerbread Die Cut to each side of the sentiment.


    • There were some cutout images on my desk and thought they would also look good on the card, so I added the bottom two cards for a couple more ideas.





    These are the Rubbernecker Stamps products used for the cards.


    Gold Glitter Christmas Card

    I know this may seem early but it's Christmas in July, if you start now and make a few each month, you won't be in a rush to make Christmas cards in December.  My card is quick and easy so if you have a lot to make this might be for you.  

    Here's how my card was made-

    • Die-cut the Tree In Oval from gold glitter paper, I used the Crossover II Fabric & Paper Cutting System.


    • Apply 3D Foam Squares from Scrapbook Adhesives by 3L to the backside of the die-cut piece.

    • Place this piece on a 4" x 5 1/4" cream cardstock panel and lightly mark the inside of the oval with a pencil.
    • Before removing the die-cut piece stamp the sentiment from the Wintery Friends Set with gold ink and emboss with clear embossing powder.
    • Randomly stamp snowflakes from the Snowmen with Presents Set.
    • Adhere the cream panel to a kraft and gold polka dot card.

    • Now adhere the die-cut piece to the card.